Plumbing tips for beginners

There are a few things which every homeowner needs to know or be aware of their plumbing systems. In fact, a little knowledge on how your plumbing system works will help in getting the system maintained on time and can also help in preventing sudden difficulties or emergency situations.

Beginners plumbing tips are all about some basic knowledge of your plumbing system, on how some components work and how to deal with problems which need repairs. These easy tips for beginners are basic understanding on how to ensure smooth running of the plumbing system. However, it needs to be noted that though these tips are handy and useful, professional guidance is always recommended. No one can take care of your plumbing system better than a professional plumbing company.

Replacements Are Necessary – Do Not Be Scared

Every plumbing component comes with its own lifespan. After its regular usage or lifespan, it needs to be replaced. You cannot avoid replacements, no matter how good you feel. If there are continuing problems with some parts of your plumbing system which includes showers, sinks or pipes, your plumber might suggest replacement. Be positive and replace the component.

Pipe Insulation

You need to use the technique of pipe insulation so that sprayer problems are done away with. You can simply slip in one half an inch foam pipe which works as insulation, over the shutoff handles and pipes. Place a tape around this, so that it doesn’t move. This insulation is easy and will help in keeping away several plumbing problems.

Wrapping Pipes

One major problem with the hot water pipes is that they tend to expand. As hot water moves through the pipe, it starts to expand. The pipes also tend to grind against the hangers. If you use some felt, with an adhesive to wrap around the pipes, it can help a lot. You just need to slice the felt in small strips. You will then move the hanger and then wrap this pipe, before you refasten this hanger again.

Do you often feel annoyed with the loud noises from the sink?

This is quite common and can be fixed easily. You will need some expanding foam and then fill the area between the sink basins. The foam will help in reducing the vibrations which cause the gong effect. This is easily done when the sink is in place. Once you are done with this, allow the foam to slowly harden and then you can do away with the excessive foam with the help of a knife.

Hard Objects Stuck In The Drains

This is the first step towards drain clogging. In spite of being careful all the time, some hard objects might still get lodged in the drain. At times objects like a comb or a toothbrush fall accidently and get lodged. Normal cleaners are usually not able to remove such kind of clog. You can use a shop vacuum to remove this clog. A plunger will not be of help, as it will push the obstruction deeper into the pipe. The best option is to suck the water out with the help of a dry/wet shop vacuum.

Locating a Pipe –

If you need to locate a pipe which is deep under the premises, how do you do that? Professional plumbers will certainly help you, but before you call them, try using a strong magnet. You need to fix a magnet well to a fishing tape. Feed this pipe deep inside the drain lines. You can then locate the position of this magnet with the help of a compass. This is an easy way to find deep hidden pipes, until you have ready help.

Easy Flushing –

One easy way to flush your toilet when there is any plumbing project going on, is to use one big bucket of water. You can flush away at least two buckets of water. Water is quite helpful in keeping the sinks or bowls clean.

Last but not the least, you need to check all the hidden spaces in your plumbing system. Once you are able to detect the hidden spaces, it will help in detecting any probable problems. You will be able to keep away plumbing emergencies to a certain extent.

Thanks to our sponsor of the day, Oklahoma City Plumbing.

This entry was posted in General. Bookmark the permalink.